Trustpilot
top of page

Indoors

Färgbygge Naturum
Trälasyr (Wood Glaze)

The satin matte wood glaze can be tinted in the entire NCS color scale.

Water-based wood glaze for interior wooden surfaces, such as paneling, rough-sawn boards, and moldings. Provides a durable satin matte finish and can be layered with multiple coats. The stain prevents yellowing and resists knot bleed-through.

Contents

Water,
Pigment (TiO₂)*,
Shellac,
Mineral filler,
Casein,
Ethanol,
Sunflower lecithin,
Cellulose,
Vegetable oils,
Natural resin
Potassium sorbate**
IPBC**.

*Pigment TiO₂ is only present in Färgbygge Trälasyr Vit (Wood Glaze White) and not in Färgbygge Trälasyr C-bas (Wood Glaze Base C).

**Ethanol is used in combination with potassium sorbate (E 202) to disinfect packaging and production equipment. The preservative IPBC (3-iodo-2-propynyl butylcarbamate) may be present in less than <0.01%.

Facts

Usage

Packaging

Bases

Gloss

Coverage

Tools

Painting Temperature

Thinned with

Repaintable

Color

For interior wooden surfaces.
1L, 3L, 10L.
White, C-bas
Satin matte.
1L can cover an area of approximately 6-8 m².
Pensel, roller, spruta
15-25˚C
Can be diluted with water, if needed.
After Approximately 3 hours.
Tintable according to NCS color scale.

Makes  like this

Documentation & Information

PREPARATION

Ensure that the surface is dry, firm, and free from dirt and grease.

Use fine sandpaper to make glossy surfaces matte.

Highly absorbent surfaces and resinous wood with many knots can be pre-treated with FÄRGBYGGE NATURUM HARTSGRUND (Naturum Resin Primer).

When painting previously oiled surfaces, there is a risk of discoloration.

PAINTING

Thoroughly stir the paint before use.

Apply an even, thin coat and smooth it immediately with a brush, following the direction of the wood grain.

Test the adhesion on a small, inconspicuous area or a test piece.

IMPORTANT

Do not use the paint in damp areas.

Ensure that the room is well-ventilated during both the painting process and the curing time.

Do not use paint that has an unusual odor or tends to develop mold.

AFTER PAINTING

Scrape off excess paint from tools before cleaning them.

Others also looked at these products

Image-empty-state_edited.png

Inomhus

Färgbygge Naturum
Trälasyr

Image-empty-state_edited.png

Indoors

Färgbygge Naturum
Trälasyr (Wood Glaze)

Image-empty-state_edited.png

Inomhus

Färgbygge Naturum
Hartsgrund

bottom of page