RESPEKT Snickerifärg (Lacquer Paint)

Usage  Carpentry indoors

Packaging  3L, 10L

Packaging color Smear sample, Sample 200ml, 0.9L, 2.7L, 3L

Dilute with Water, if needed

Gloss  Silk mat 15

Painting temperature  15-25°C

Can be painted over  After about 4 hours

Tools  Brush, roller or sprayer

Consumption  1L is enough for 8-10 m²

Water, pigment, mineral filler and Färgbygge's proprietary composite binder RESPECT. As a preservative, IPBC (3-iodo-2propynyl butylcarbamate) may be present at less than <0.01%.

PREPARATION
Make sure the surface is dry, firm and clean of dirt and grease. Prime with RESPECT CARPENTRY GRUND and intermediate sanding with fine sandpaper before final ironing. 

PAINTING
Stir well. Apply fluidly and work the color properly. Avoid going back with the brush when the paint has started to settle.

BOARD OF DIRECTORS 
Be careful with freshly painted surfaces. The final properties of the paint are only achieved after a week and until then it is sensitive to wear. Clean the surface with a clean cloth moistened with lukewarm water.

IMPORTANT
Make sure the room is well ventilated both during the painting and the curing time, which can take up to a week. Close the opened jar well. Shelf life in opened cans is limited. Paint that has an unusual smell or a tendency to form mold should not be used. Scrape the tools before cleaning. Leave liquid paint residues at the local environmental station. Properly emptied packaging is handed over to the recycling station.

Safety data sheet

Product sheet