FÄRGBYGGE TILJA Träsåpa (Wood Soap)

Use  Cleaning and maintenance of surfaces treated with oil, soap or lye

​ Packaging   1L, 2.5L

Tool  Mop, cloth

The potassium salt of renewable fatty acid <15%, Nonionic surfactants <5%

PREPARATION

· For best results, the surface should be sanded before treatment.

· Vacuum or dry wipe the surface to remove all sanding dust.

DOSAGE

· Initial treatment: Mix 200 ml of soap with 1 liter of lukewarm water (covers approximately 10m²).

· Periodic maintenance: Mix 100 ml of soap with 1 liter of lukewarm water.

· Cleaning: Mix 50 ml of soap with 1 liter of lukewarm water.

INITIAL TREATMENT

· Remove any previous treatment from the floor, and vacuum/dry mop the floor thoroughly. If desired, perform lye treatment (see separate instructions) depending on the desired result.

· Make sure to shake the bottle (especially important for pigmented soap to distribute the pigments in the bottle).

· Mix the soap in a bucket according to the dosage above. Note that the number of applications/coverage may vary depending on the age or porosity of the floor. Apply the soap solution to the floor using a mop/cloth and let it dry for about 1 hour or until the surface feels dry.

Repeat 2-3 times until the surface no longer absorbs more soap. Wipe off any excess with a lint-free cloth after the final application.

Safety data sheet

Product sheet