Indoors

RESPEKT Grundfärg
(Primer)

RESPEKT Primer serves an important function as it smooths the surface and creates an even, absorbent substrate with good adhesion for the finishing paint.

Suitable for walls and ceilings on surfaces such as plaster, concrete, gypsum boards, and previously painted areas.

The RESPEKT series is the result of extensive development work to contribute to the transition towards more sustainable painting practices. The paints are water-based and contain a significant proportion of renewable raw materials.

Innehåll

RESPEKT Primer contains the following ingredients: water, pigments, mineral fillers, and Färgbygge's proprietary composite binder called RESPEKT. As a preservative, it may contain IPBC (3-iodo-2-propynyl butylcarbamate) in a concentration of less than 0.01%.

Fakta

Användning

Förpackning

Spädes med

Glans

Målningstemperatur

Övermålningsbar

Verktyg

Åtgång

Baser

Indoor use on walls and ceilings.
3L, 10L.
Can be diluted with water, if needed.
Matte.
15-25°C.
After approximately 6 hours.
Brushes, rollers, or sprayers.
1L can cover an area of approximately 6-8 m².
White.

Gör så här

Dokumentation & information

PREPARATION

Ensure that the surface is dry, firm, and free from dirt and grease.

Use fine sandpaper to make glossy surfaces matte.

For highly absorbent or porous surfaces, pre-treat them with FÄRGBYGGE NATURUM HARTSGRUND.

PAINTING

Thoroughly stir the paint before use.

Apply the paint generously and work it into the surface thoroughly.

Test the adhesion on a small, inconspicuous area or a test piece.

The paint can be recoated after approximately 6 hours.

For more information about the products and their application, visit www.fargbygge.se.

IMPORTANT

Do not use the paint in damp areas.

Ensure that the room is well-ventilated during both the painting process and the curing time, which can take several weeks.

Close the opened can tightly. The shelf life of opened cans is limited.

Do not use paint that has an unusual odor or tends to develop mold.

Scrape off excess paint from tools before cleaning them.

Dispose of liquid paint residues at your local environmental station.

Empty containers should be recycled at the recycling station.