Indoors
RESPEKT Snickerigrund
(Lacquer Primer)
RESPEKT Wood primer serves an important function: it smooths the surface and creates an even, porous base for the finishing paint.
Suitable for painting indoor carpentry.
The RESPEKT series is the result of extensive development work to contribute to the transition towards more sustainable painting practices. The paints are water-based and contain a significant proportion of renewable raw materials.
Content
RESPEKT Carpentry Primer contains the following ingredients: water, pigments, mineral fillers, and Färgbygge's proprietary composite binder called RESPEKT. As a preservative, it may contain IPBC (3-iodo-2-propynyl butylcarbamate) in a concentration of less than 0.01%.
Facts
Usage:
Packaging:
Dilution:
Gloss:
Painting Temperature:
Recoatability:
Tools:
Coverage:
Base color:
Indoor carpentry.
1L, 3L.
Can be diluted with water, if needed.
Matte.
15-25°C.
After approximately 4 hours.
Brushes, rollers, or sprayers.
1L can cover an area of approximately 8-10 m².
White.
Do it this way
Documentation & information
PREPARATION:
Ensure that the surface is dry, firm, and free from dirt and grease.
Use fine sandpaper to make glossy surfaces matte.
Strongly absorbent or porous surfaces can be pre-treated with FÄRGBYGGE NATURUM HARTSGRUND.
PAINTING:
Thoroughly stir the paint before use.
Apply the paint generously and work it into the surface thoroughly.
Avoid going back over the paint with the brush once it starts to set.
Test the adhesion on a small, inconspicuous area or a test piece.
The paint is recoatable after approximately 4 hours.
For more information about the products and their application, visit www.fargbygge.se.
MAINTENANCE ADVICE:
Handle newly painted surfaces with care. The paint's final properties are achieved after several weeks, and it is susceptible to wear and tear during that time.
Matte surfaces are generally sensitive to glossing if rubbed. Clean the surface with a clean cloth dampened with lukewarm water.
IMPORTANT:
Do not use the paint in damp areas.
Ensure that the room is well-ventilated during both the painting process and the curing time, which can take several weeks.
Close the opened can tightly. The shelf life of opened cans is limited.
Do not use paint that has an unusual odor or tends to develop mold.
Scrape off excess paint from tools before cleaning them.
Dispose of liquid paint residues at your local environmental station.
Empty containers should be recycled at the recycling station.
Others also looked at these products
