Trustpilot
top of page

Outdoors & Indoors

BEECK MBA-Fixativ

Special fixative for mineral substrates with low water washability.

Potassium water glass with low organic content. Used for priming and stabilizing porous, water-repellent, and mineral building materials in interior surfaces and facades, such as plaster and rendering modified with synthetic resin, externally insulated composite systems (ETICS), and weather-exposed emulsion coatings. Ideal for durable silicate glass with BEECK powder pigments, for example, on smooth-rendered concrete.

Fakta

Krav på underlag

Användning

Förpackning

Spädes med

Glans

Målningstemperatur

Övermålningsbar

Verktyg

Åtgång

Baser

Indoor and outdoor
Available in 1 L and 5 L containers.
Can be diluted with water, if needed.
Matte.
Minimum +8˚C.
After approximately 8 hours.
Brushes.
Approximately 0,03 l/m².
Transparent

The substrate must be mineral, water-washable, clean, dry, solid, stable, and free from efflorescent and separating substances. It is preferably used on poorly water-washable, water-repellent (hydrophobic), yet porous and silicification-compatible mineral building materials, such as ETICS (externally insulated composite systems), and organic silicate coatings.

Suitable substrates include porous, absorbent to weakly water-washable, minerals, and silicification-compatible surfaces such as lime plaster and rendering, cement plaster and rendering, concrete, smooth-rendered concrete, natural stone, brick, calcium

silicate masonry, old coatings, synthetic resin-based renders, or renders, ETICS, provided that the substrate is properly prepared.

Unsuitable substrates are horizontally exposed, less stable, efflorescent, and non-alkaline-resistant surfaces, such as wood-based materials (MDF, OSB), clay or clay soil, gypsum, and plasters, as well as old, non-solid, and plastoelastic coatings. Defective substrates require different treatments.

For application on damp, salt-contaminated surfaces, basement walls, and foundation areas, apply a diffusion-open renovation plaster or rendering. Cover the entire surface with a base layer of BEECK Quartz Filler.

Please note that the provided text describes specific guidelines for using BEECK products on different types of surfaces. For more accurate information and product usage, it is essential to consult the manufacturer's instructions and recommendations. *Applies to certain colors

Appliceringsanvisningar

The substrate must be mineral, water-washable, clean, dry, solid, stable, and free from efflorescent and separating substances. It is preferably used on poorly water-washable, water-repellent (hydrophobic), yet porous and silicification-compatible mineral building materials, such as ETICS (externally insulated composite systems), and organic silicate coatings.

Suitable substrates include porous, absorbent to weakly water-washable, minerals, and silicification-compatible surfaces such as lime plaster and rendering, cement plaster and rendering, concrete, smooth-rendered concrete, natural stone, brick, calcium

silicate masonry, old coatings, synthetic resin-based renders, or renders, ETICS, provided that the substrate is properly prepared.

Unsuitable substrates are horizontally exposed, less stable, efflorescent, and non-alkaline-resistant surfaces, such as wood-Verify the suitability of the substrate.

Thoroughly cover the surfaces that should not be treated (e.g., windows, window profiles) and protect them from splashes.

Provide personal protective equipment.

Avoid using it in wet conditions, during frosty weather, on hot surfaces, or under direct sunlight.

Minimum application temperature: +8°C.

Protect freshly applied coatings from rain and direct sunlight.

Test on a sample area on-site to determine variations in application quantities due to substrate conditions.

Please note that the provided text describes specific guidelines for using BEECK products on different types of surfaces. For more accurate information and product usage, it is essential to consult the manufacturer's instructions and recommendations. *Applies to certain colors

Dokumentation & information

Rengöring och lagring

Thoroughly clean the equipment, tools, and soiled clothing with water immediately after use.

When stored in a cool and frost-free place, it can be kept for at least 12 months.

If mixed with powder pigments, seal the container airtight and use it within 4 weeks.

It's important to follow these cleaning and storage instructions to maintain the quality and usability of the product.

Andra tittade även på dessa produkter

Image-empty-state_edited.png

Outdoors & Indoors

BEECK Häftgrund Fin

Image-empty-state_edited.png

Outdoors & Indoors

BEECK Beeckosil Fin

Image-empty-state_edited.png

Outdoors & Indoors

BEECK Fixativ

bottom of page