Trustpilot
top of page

Outdoors & Indoors

BEECK Fixativ

Primer, diluent, and binder for BEECK silicate paint. Free from organic content. Potassium water glass without organic content, is effective as a binding and diluting additive, as well as for priming and stabilizing porous and mineral substrates.

Silicate paints. Free from organic content. Potassium water glass without organic content, is effective as a binding and diluting additive, as well as for priming and stabilizing porous and mineral substrates. Suitable for representative historical buildings as well as modern, healthy, and sustainable architecture. Clear and transparent.

Fakta

Krav på underlag

Användning

Förpackning

Spädes med

Glans

Målningstemperatur

Övermålningsbar

Verktyg

Åtgång

Baser

Indoor and outdoor.
Available in 1 kg and 5 kg containers.
Can be diluted with water, if needed.
Matte.
Minimum +8˚C.
After approximately 12 hours.
Brushes.
Approximately 0,04 kg/m².
Transparent.

The substrate must be mineral-based, water-compatible, clean, dry, solid, stable, and free from efflorescent and separating substances.

Suitable substrates include shrinkage-free, dimensionally stable, porous to non-penetrable, water-absorbing to water-repellent substrates with at least partially mineral character, such as lime plaster/render, lime-cement plaster/render, cement plaster/render, gypsum plaster/render, stucco, gypsum, gypsum boards, concrete, fiber cement, natural stone, brick, calcium silicate masonry, ceramics, old coverings, synthetic plaster or resin render, and external thermal insulation composite systems (ETICS), provided that the substrate is correctly prepared.
Unsuitable substrates are horizontally exposed, less solid, efflorescent, and non-alkali-resistant substrates such as wood-based materials (MDF, OSB), clay, or loam.

Additionally, thermoplastics as well as old, non-solid, glossy, and plastoelastic coatings are unsuitable.

Defective substrates require different treatments. Apply a non-vapor-permeable moisture-inhibiting renovation plaster or render on damp, salt-attacked surfaces and on the base areas.

*Applies to certain colors

Appliceringsanvisningar

Verify the suitability of the substrate.

Thoroughly cover the surfaces that should not be treated (e.g., windows, windowsills) and protect them from splashes.

Provide personal protective equipment.

Do not use in wet conditions, in the presence of risk of frost, on hot surfaces, or under direct sunlight.

Minimum application temperature: +8°C.

For priming, dilute 1 part BEECK Primer with 2 parts water.

Apply with a brush.

Test on a sample area on-site to determine variations in application quantities due to substrate conditions.

Please note that the provided text describes specific guidelines for using BEECK products on different types of surfaces. For more accurate information and product usage, it is essential to consult the manufacturer's instructions and recommendations. *Applies to certain colors

Dokumentation & information

Rengöring och lagring

Thoroughly clean the equipment, tools, and soiled clothing with water immediately after use.

When stored in a cool and frost-free place, it can be kept for at least 18 months.

Seal open containers airtight and consume the contents within 20 days.

It's important to follow these cleaning and storage instructions to maintain the quality and usability of the product.

Andra tittade även på dessa produkter

Image-empty-state_edited.png

Outdoors & Indoors

BEECK Häftgrund Fin

Image-empty-state_edited.png

Outdoors & Indoors

BEECK Beeckosil Fin

Image-empty-state_edited.png

Outdoors & Indoors

BEECK MBA-Fixativ

bottom of page